Tag: Qualicoat Test

Qualicoat-Test Methods and Requirements The Qualicoat-Test methods described below are used to test finished products and/or coating systems for approval (see chapters 4 and 5). For the mechanical tests (sections 2.6, 2.7 and 2.8), the test panels must be made of the alloy AA 5005-H24 or -H14 (AlMg 1 – semihard) with a thickness of 0.8 or 1 mm, unless otherwise approved by the Technical Committee. Tests using chemicals and corrosion tests should be performed on extruded sections made ofRead More …

SPECIFICATIONS FOR A QUALITY LABEL FOR PAINT, LACQUER AND POWDER COATINGS ON ALUMINIUM FOR ARCHITECTURAL APPLICATIONS 12th Edition-MASTER VERSION approved by the QUALICOAT Executive Committee on 25.06.2009 Chapter 1 General Information 1. General Information These Specifications apply to the QUALICOAT quality label, which is a registered trademark. The regulations for use of the quality label are set out in Appendix A1. The aim of these Specifications is to establish minimum requirements which plant installations, coating materials and finished products mustRead More …