UVavanyo lokugoba – Inkqubo yoVavanyo lweQualicoat

Zonke iingubo zendalo ngaphandle kweklasi 2 kunye ne-3 Ipeyinti: EN ISO 1519
Udidi 2 kunye no-3 lomgubo wokugquma:
I-EN ISO 1519 ilandelwa luvavanyo lokuncamathela lweteyiphu njengoko kuchaziwe ngezantsi:
Faka i-tape yokubambelela kwindawo ebalulekileyo yepaneli yokuvavanya emva kokuguqulwa komatshini. Gubungela indawo ngokucinezela phantsi ngokuqinileyo kwi-coating ukuphelisa i-voids okanye iipokotho zomoya. Tsala i-tape ngokukhawuleza kwii-angles ezifanelekileyo kwi-plane yepaneli emva komzuzu we-1.
Uvavanyo luya kwenziwa kwi-coating ye-organic enobunzima obumalunga nobuncinci obufunekayo.
Kwimeko yesiphumo esibi, uvavanyo lwe-bend luya kuphinda luphindwe kwipaneli eboshwe ngobunzima

• Iklasi 1 kunye ne-2: 60 ukuya ku-70 μm
• Iklasi 3: 50 ukuba 60 μm

IIMFUNO:
Ukugoba malunga ne-5 mm mandrel kuzo zonke iingubo eziphilayo ngaphandle kwamacandelo amabini kunye namanzi-thinnable yolwelo. Kuba ezi, sebenzisa mandrel 8 mm.
Ukusebenzisa umbono oqhelekileyo ochanekileyo, ukugquma akuyi kubonakalisa naluphi na uphawu lokuqhekeka okanye ukuchithwa, ngaphandle kweklasi ye-2 kunye ne-3 ye-powders.
Udidi 2 kunye no-3 lomgubo wokwaleka:
Ukusebenzisa umbono ochanekileyo ochanekileyo, i-coating ye-organic ayiyi kubonisa naluphi na uphawu lwe-detachment emva kovavanyo lokubambelela kwi-tape.