Inkqubo yoVavanyo lweMpembelelo yoMgangatho weQualicoat

NgeePowder Poatings Kuphela.

Impembelelo iya kuqhutywa kwicala elingasemva, ngelixa iziphumo ziya kuvavanywa kwicala eligqunyiweyo.

• -Iklasi yoku-1 Ipeyinti (idyasi enye nezimbini), amandla: 2.5 Nm: EN ISO 6272- 2 (idayamitha ye-indenter: 15.9 mm)
• -Iingubo ezimbini zePVDF zepowder powder, amandla: 1.5 Nm: EN ISO 6272-1 okanye EN ISO 6272-2 / ASTM D 2794 (i-indenter diameter: 15.9 mm)
• -I-Class 2 kunye ne-3 ye-powder coatings, amandla: 2.5 Nm: EN ISO 6272-1 okanye EN ISO 6272-2 / ASTM D 2794 (i-indenter diameter: 15.9 mm) ilandelwa yi-tape yokutsala uvavanyo lokubambelela njengoko kuchazwe ngezantsi.
  Faka isicelo se-adhesive tape (jonga § 2.4) kwindawo ebalulekileyo yepaneli yokuvavanya emva kokuguqulwa komatshini. Gubungela indawo ngokucinezela ngokuqinileyo ngokuchasene ne-organic coating ukuphelisa i-voids okanye iipokotho zomoya. Tsala i-tape ngokukhawuleza kwii-angles ezifanelekileyo kwi-plane yepaneli emva komzuzu we-1.

Uvavanyo luya kwenziwa kwi-coating ye-organic enobunzima obumalunga nobuncinci obufunekayo.
Kwimeko yesiphumo esibi, uvavanyo luya kuphinda luphindwe kwiphaneli ehlanganiswe nobukhulu

• Iklasi 1 kunye ne-2: 60 ukuya ku-70 μm
• Iklasi 3: 50 ukuba 60 μm

IIMFUNO:
Ukusebenzisa umbono ochanekileyo oqhelekileyo, i-organic coating ayiyi kubonisa naluphi na uphawu lokuqhekeka okanye ukuchithwa, ngaphandle kweklasi yesi-2 kunye ne-3 yeengubo zomgubo.
Udidi 2 kunye no-3 lomgubo wokugquma:
Ukusebenzisa umbono ochanekileyo ochanekileyo, i-coating ye-organic ayiyi kubonisa naluphi na uphawu lwe-detachment emva kovavanyo lokubambelela kwi-tape.