Ikhaya » Umthengisi wePowder Coating Powder » Thermoplastic Polyethylene PE Powder Coating

Thermoplastic Polyethylene PE Powder Coating

FHTH® Polyethylene PE yengubo (umthengisi wentsebenziswano PECOAT®) luhlobo oluthile Thermoplastic powder ukutyabeka. Iveliswa nge-high-pressure polyethylene (LDPE) njengento esisiseko, yongeza iindidi ezongezelelweyo ezisebenzayo kunye umbala ibala. Umaleko wokugquma unokumelana neekhemikhali okugqwesileyo, ukuchasana nokuguga, ukuxhathisa impembelelo, ukugoba ukugoba, ukuxhathisa kweasidi, ukuxhathisa ukubola, kunye neempawu ezintle zokuhombisa umphezulu.
Polyethylene PE powder ukutyabeka

iimpawu

  • I-asidi egqwesileyo kunye nokumelana ne-alkali, ukuchasana kweekhemikhali
  • Ukufakwa kakuhle kobushushu kunye nokugquma kombane
  • Ukuguquguquka okugqwesileyo kunye nokuchasana kwempembelelo
  • Ukumelana kakuhle nobushushu obuphantsi, akukho kuqhekeka kunye ne-400hrs phantsi kwe -30 ℃, ifanelekile kwiindawo ezibandayo ezibandayo.
  • Ayinatyhefu, ithobela iimfuno zokhuseleko lokusingqongileyo.

ukusebenzisa

Ishelufu yeegridi zefriji, ibhaskithi yebhayisekile, isilawuli, iithoyi, izitshixo, izixhobo, kunye nefenitshala yegadi, ibhaskithi yangaphakathi, njl.

Ukusebenzisa Inkqubo

  1. Ukutshisa iqhekeza lomsebenzi ukuya kuthi ga kwi-300-400 ℃
  2. Emva koko dipha iqhekeza lomsebenzi kwibhedi emanzi: imizuzwana emi-2-3.
  3. Beka kwi-oven ukutshisa: imizuzu emi-2-5 kunye ne-200-220 ℃

Ubushushu benkqubo esetyenzisiweyo kufuneka bube bubuncinci bokufikelela ukugqiba okwamkelekileyo kumphezulu. Ukutshisa ngokugqithisileyo
kunokubangela ukuba isambatho sibe nombala kamva kwindawo yokugcina okanye kwinkonzo.

Iipropati zomgubo

  • Ubunzima obukhethekileyo: 0.9-0.92 g/m3,
  • Izinto ezingaguqukiyo: ≥99.5%
  • Isalathisi sokunyibilika: 10-50g / 10min,
  • Ubungakanani besuntswana: ＜300μm
  • Ukupakisha: 25kg / ibhegi

Iipropati zokwaleka

  • Ubunzima bokugquma: 200μm- 1200μm
  • Imbonakalo: Igudileyo ngokwemodareyitha ekhazimlayo
  • Ubunzima: 44-80
  • I-Anti-impack/N.cm > 490
  • Ukumelana nemichiza: Kugqwesileyo

Substrate

  • Isubstrate efanelekileyo yi-Iron, Steel, Copper.
  • Aluminiyam, i-zinc, igalvanized, lead ayisebenzi.

Ngolwazi oluthe kratya malunga nePolyethylene PE powder coating, nceda uqhagamshelane nathi.

Ii-FAQs - Polyethylene Powder

Ndingasifumana njani isicelo?

Sidla ngokuyila ifomula ngokwemveliso yabathengi. Ngoko ke ukuze unike amaxabiso achanekileyo, ulwazi olulandelayo luyimfuneko.

  • Yeyiphi imveliso oyinxibayo? Kungcono ukusithumelela umfanekiso.
  • Ngaba zezokusetyenziswa ngaphandle okanye zangaphakathi?

Yintoni MOQ?

  • Ngomyalelo osemthethweni, i-moq yi-1000kg, ithunyelwa ngolwandle.
  • Uvavanyo lwesampula, i-1-25kg, ukuthunyelwa ngomoya.

Ithini indlela yokupakisha?

25kg/bag, 1ton/pallet, 10-12.5ton/20ft container, 22.5ton/40ft container

Iyiphi ixesha lokuhambisa?

iintsuku 2-7 emva kokufumana idiphozithi ngokobungakanani odolo.

I-FAQ-Inkqubo yeBhedi eFluided, iTanki yokuDipha

Loluphi ulwazi endimele ndilunike xa ndifuna ukucaphula?

Isixhobo senziwe-kuya-odolo, ulwazi olulandelayo luyimfuneko ukuba ufuna ukufumana isicatshulwa.

Ngetanki yokudipha kuphela (ibhedi emanzi):

  1. Ubukhulu bobungakanani bobungakanani bomsebenzi owuqabileyo

Ngeseti epheleleyo yomgca wokudipha ozenzekelayo (i-oveni yangaphambi kobushushu + itanki yediphu + i-oveni yasemva kobushushu + umkhondo wokuhambisa)

  1. Ubukhulu bobungakanani bobungakanani bomsebenzi owuqabileyo.
  2. Imveliso yemihla ngemihla(usuku olunye=iiyure ezisibhozo,inyanga enye=iintsuku ezingama-8)
  3. Uhlobo lomthombo wokufudumeza: umbane, igesi okanye idizili
  4. Ubungakanani beworkshop yakho (ubude, ububanzi kunye nobude)

Iyintoni inkonzo emva kokuthengisa ?

  • Ukuba kukho nayiphi na ingxaki okanye ukusilela ekusebenziseni, siyakwazi ukunceda ukude ngenethiwekhi yekhompyuter.
  • sinikezela ngoluhlu lwezinto ezisetyenziswayo ukuncedisa abathengi ekusekeni inkqubo yogcino olubanzi.
  • iinjineli zethu zikwinkonzo yakho nangaliphi na ixesha.

Umdlali ka YouTube

Amanqaku ayeleleneyo :