Nchọpụta Nchọpụta Nhazi nke Putty Na-eduzi Eletriki

Ụzọ omenala nke nchebe corrosion maka ọla bụ: plating, powder paints na water paints. Arụmọrụ nke mkpuchi na-efesa ụdị mkpuchi dị iche iche, yana usoro ịgba mmiri dị iche iche dịgasị iche iche, ma na mkpụrụ ndụ ihe nketa.ral, tụnyere ihe mkpuchi agba mmiri mmiri, na mkpuchi mkpuchi. mkpuchi ntụ ntụ nye a ok Ọdịdị na mkpuchi ọkpụrụkpụ (0.02-3.0mm), ezi shielding mmetụta dị iche iche media, nke a bụ ihe mere ntụ ntụ ntekwasa mkpụrụ na-enye ogologo ndụ atụmanya.
Uzuzu mkpuchi, na usoro, ugbu a na oké dịgasị iche iche, elu arụmọrụ, ọnụ ala, mfe ịrụ ọrụ, ọ dịghị mmetọ na ndị ọzọ e ji mara arụmọrụ, na ngwaahịa na mgbochi corrosion, decorating, electric mkpuchi, ogologo ndụ na ndị ọzọ uru. uzuzu mkpuchi nwere ike, n'ọtụtụ ụzọ, dochie omenala mmiri mmiri agba maka mgbochi corrosion, na-egosi mgbe niile ya na-abawanye amara na ihe ike ịzọpụta na ji achọ ubi.

Ogo nke ntụ ntụ ntekwasa workpieces tumadi dabere na àgwà nke tupu ọgwụgwọ tupu spraying. Electrostatic spraying ntụ ntụ coatings adịghị mkpa dobe priming, n'ihi ya, ọ na-achọ elu àgwà nke elu nke substrate. Otú ọ dị, na workpiece a ga-ntekwasa emekarị na-egosi na-erughị eru elu na mfe ọkọ na-afụ ụfụ kpọrọ ihe. Maka ihe ndị a na-arụ ọrụ, a ga-eji putty na-eduzi ọkụ eletrik mejupụta elu na-enweghị isi iji kwe nkwa ịchọ mma na nchebe ya. Otú ọ dị, na Electrically Conductive Putty ere na anụ ụlọ ahịa na-enye ogbenye electrostatic conductivity, ala ọnụego nke ntụ ntụ na oké usatisfactory results.The conductive adhesion ibubata nke na-enye ezi conductivity, elu ọnụego nke ntụ ntụ ojiji, ma dị oke ọnụ.

The conductive putty ewepụtara na nke a akwụkwọ na-egosi a ọma adhesion na conductivity, akụrụngwa ndị dị mfe iji nweta ,itsrecipes dị mfe na mfe iji, ọnụ ala, mmetọ-free, na mma hụ na àgwà nke pretreatment maka electrostatic ntụ ntụ mkpuchi.

1.Nhazi nhazi

Iji nweta usoro kacha mma nke conductive putty, a na-akwado ụdị atọ a haziri iji duzie nyocha na ntụnyere.

(1) Ịdị mma nke Putty na-arụ ọrụ eletrik na ahịa adịghị mma, nke a na-agbakwunye ihe ntanye aluminom iji mee ka ọkụ eletrik ya dịkwuo elu;

(2) Iji tinye aluminum tapawa na epoxy putty eji na mmiri mmiri agba spraying usoro.

(3) Iji tinye nrapado na aluminom tapawa.

Conductive putty na-achọkarị maka electrostatic spraying na pretreatment usoro, ọ na-achọ ọ bụghị nanị na a mma conductive arụmọrụ, kamakwa ike nke okpomọkụ iguzogide 180 degrees Celsius, nakwa dị ka adhesion dị mma na metal, otú usoro a na-ahọrọ pụrụ iche nrapado na. ezigbo mgbasa ozi mgbasa ozi (dị ka mmanụ, na mmiri, na acid, na alkali,) àgwà ọma nke njikọ na ọla, ala okpomọkụ ihicha, elu okpomọkụ na-eguzogide, ọ dịghị nsi na ọnụ ala na-eri, wdg.

2.Formula atụnyere nsonaazụ

Dị ka usoro atọ ndị dị n'elu si dị, a ga-akwado ụdị atọ eletriki conductive putty, mgbe ahụ, iji ha maka workpiece nwere ntụpọ elu yiri ya na pretreatment nke aluminom ma ọ bụ galvanized ígwè, n'ikpeazụ, a ga-eme nnwale ntụnyere site na ịgbasa electrostatic.
Usoro nnwale:
Mmanụ, nchara mwepụ - akọrọ - tinye conductive putty - akọrọ - ntụ ntụ ntụ usoro - ihicha
Nsonaazụ ahụ:

• (1) Na-agbakwụnye obere ego nke (5% -10%) aluminum tapawa na conductive putty , conductivity ga-amụba ubé, ma adhesion nke putty na mkpụrụ na-ebelata budata na ike mkpuchi, conductivity ka na-adịghị afọ ojuju;
• (2) The usoro na-enye ezi adhesion nke putty na substrates, ma conductivity bụ adịghị mma;
• (3) Nke a na-etinye putty nke ijikọta mkpokọta 3% -15% aluminum tapawa na nrapado ahọpụtara, nnwale na-egosi na ọ na-enye ezigbo adhesion na conductivity, na-abụghị proliferation, magburu onwe mkpuchi. agba, ezi mgbanwe na ike mmetụta Njirimara.

N'ịchịkọta, usoro 3 bụ nhọrọ kachasị mma nke conductive putty.

3. Mmechi

Nnwale ule na-enye usoro echiche nke putty conductive - ijikọta 3-15% aluminom tapawa na nrapado ahọpụtara. Nke a na usoro dị mfe, na nontoxic, na-enye ezi adhesion na conductivity, ngwa ngwa ihicha (60 Celsius degrees, 1 awa ma ọ bụ na ụlọ okpomọkụ 1 ụbọchị), nwere ike budata mma ngwaahịa mma, ndụ na aku na uba uru, nwere mma ngwa atụmanya.