Mkpuchi Epoxy jikọtara Fusion
FHBE® S1 Single Layer FBE mkpuchi ntụ ntụ bụ mkpuchi mkpuchi Epoxy nke Fusion nwere otu teknụzụ nchedo corrosion maka ọkọlọtọ ọrụ. Ọ nwere njirimara mgbanwe dị mma ọbụlagodi na -50°C (-58°F) ma gosipụta nnabata mmiri dị ala. Ọkpụrụkpụ mkpuchi akwadoro dị na oke nke 300 - 700 µm.
atụmatụ
- Ezigbo mmachi na mkpụrụ metal
- Nnukwu iguzogide nkwụsị nke cathodic
- Magburu onwe corrosion eguzogide na n'ibu Njirimara
- Akwa bendability, ọbụna na elu ihe nkiri ọkpụrụkpụ
AHYHEC AHY
- agba: isi awọ, Green, Brown, Blue
- Gel oge na 200 ℃: 20-45 sec (ISO8130-6)
- Njupụta: 1.2-1.6g/cm3 (ISO 8130-6)
- Nchekwa: 12 ọnwa <23 ℃
- Nguzogide mmetụta: 2.5 J(CSA Z245.20-06 12.12)
- Mgbasa Cathodic: 4mm, 2mm (CSA Z245.20-06 12.8-23° C, -1.5 V, 28 d; 65°C, -3.5 V, 24 h)
- Mgbasa nke Cathodic mkpuchi mkpuchi 2.5°: gafere
FHBE® T3 bụ mkpuchi mkpuchi Epoxy Fusion maka usoro mkpuchi akwa 3 dị ka a mmalite. Ọ nwere ezigbo adhesion na PP dị ka primer ma nwee ọmarịcha ihe nrapado na ihe mgbochi corrosion.
FHBE® T3 bụ mkpuchi Epoxy jikọtara ọnụ n'ihi na 3 n'ígwé mkpuchi usoro dị ka primer. Ọ nwere ezigbo adhesion na PP dị ka primer ma nwee ọmarịcha ihe nrapado na ihe mgbochi corrosion.
Ihe mkpuchi 3-layer bụ usoro nchebe corrosion na-ewu ewu nke a na-eji n'ọtụtụ mba. Usoro a na-ekwe nkwa nguzogide dị elu na mwakpo kemịkalụ, ebe ọ na-eme ka adhesion zuru oke na nguzogide pụtara ìhè na mgbasa nke cathodic. Enwere ike ịrụ ọrụ dị elu site na ijikọta njirimara kachasị mma nke FBE na stabilized PE (Polyethylne) na PP (Polypropylene)
FBE primer na-egbochi mgbasa nke cathodic.
Ihe nrapado copolymer na-enye njikọ siri ike n'etiti FBE primer na elu PE/PP.
Ngwunye PE/PP na-enye mkpuchi na-agbanwe agbanwe siri ike yana nguzogide pụtara ìhè na akụrụngwa.
AHYHEC AHY
- Agba: Grey, Green, Brown, Blue
- Oge Gel na 200 ℃: 20-45 sec (ISO8130-6)
- Njupụta: 1.2 - 1.6 g / cm3 (ISO 8130-6)
- Nkwụsi ike Nchekwa: ọnwa 12 <23°C
- Nguzogide mmetụta: Mezuru (CSA Z245.20-06 12.12)
- Mgbasa nke Cathodic: 2mm